1. Home
  2. Docs
  3. BMC 100 Quick Start Guide
  4. Configure IP Address

Configure IP Address

The BMC 100 is shipped with pre-assigned network configurations.  If you need to change the IP address of the unit, please follow the steps below:

  1. Plug the USB Drive shipped with the appliance into any computer and open the file IPSETUP.txt using any text editor. DO NOT RENAME THE FILE.

    The following is the content of the IPSETUP.txt file.
    HOSTNAME=
    IP=
    NETMASK=
    GATEWAY=
    DNS=
    DNSDOMAIN=

  2. Input the values as follow:
    • Enter the hostname to be assigned to this system. e.g.
      HOSTNAME=bmchost.celestix.com
    • Enter IP Address. e.g.
      IP=192.168.1.10
    • Enter Netmask. e.g.
      NETMASK=255.255.255.0
    • Enter Gateway Address. e.g.
      GATEWAY=192.168.1.1
    • Enter DNS Servers separated by commas. e.g.
      DNS=8.8.8.8,4.2.2.1
    • Enter default DNS Search Domain. e.g.
      celestix.com
    • This is optional and may be left blank or deleted.
      DNSDOMAIN=celestix.com
  3. Save the file and exit.
  4. Plug the USB Drive into BMC 100 and reboot it.
  5. The network configurations will be updated.