1. Home
  2. Docs
  3. SecureAccess Appliance
  4. Installation (E6600)
  5. Front Panel

Front Panel

il e6600 frontpanel led e1523568286197 Front Panel
ItemLEDStatus
1NIC status LED [1]Solid green = Link to network
Flashing green (1 flash per second) = Network active
Off = No network activity
2Health LED [1]Solid green = Normal
Flashing green (1 flash per second) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 flash per second) = System critical [2]
UID button/LED [1]Solid blue = Activated Flashing blue:
• 1 flash per second = Remote management or firmware upgrade in
progress
• 4 flashes per second = iLO manual reboot sequence initiated
• 8 flashes per second = iLO manual reboot sequence in progress
Off = Deactivated
Power On/Standby button and system power LEDSolid green = System on
Flashing green (1 flash per second) = Performing power on sequence
Solid amber = System in standby
Off = No power present [3]
  1. When all four LEDs described in this table flash simultaneously, a power fault has occurred.
  2. If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
  3. Facility power is not present, the power cord is not attached, no power supplies are installed, power supply failure has occurred, or the front I/O cable is disconnected.